Beko Washing Machine Error Codes

• September 29th, 2020
• 4 Comments
• Posted in fault codes

Is your Beko Washing Machine displaying error codes which you are unsure of? If the answer is yes, we have put together a list with all the fault codes along with the explanations of what could be wrong with your washing machine.  

Error Code	Fault Description
C9	Indicates an imbalance during a spin cycle.
F9	Indicates an imbalance during a spin cycle.
E10	Indicates problems with taking in water, not taken in enough water or problems with the drain.
E11	Indicates problems with taking in water, not taken in enough water or problems with the drain.
C1	Indicates problems with taking in water, not taken in enough water or problems with the drain.
E30	The error is caused by water at the bottom or inside the machine.
C3	The error is caused by water at the bottom or inside the machine.
E40	The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty.
E41	The appliance door / lid is open or not closed correctly, the appliance is overloaded, the door lock is faulty.
E60 (or any code beginning with E6)	It generally refers to a heating problem with the machine.
E80 or emits 8 flashes	Indicates that the cycle selector was set incorrectly, or the washing machine possibly started with the cycle selector set halfway between two wash cycles.
E90, E91, E92, E93 or E94	It indicates configuration / communication problems with the electronic parts.
EAO	Error message EA0 indicates DPS (Drum Position Sensor) fault.
EA0	Error message EA0 indicates DPS (Drum Position Sensor) fault.
Eb0	It may indicate problems with the too low voltage of the power supply.
Ebo	It may indicate problems with the too low voltage of the power supply.
EF0, EFo, EF3	Use less detergent.
EHO / EH0	Indicates a problem with the power supply.
EH1	Frequency of power supply out of range.
EH2	Supply voltage too high.
EH3	Supply voltage too low.
E20	Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump.
E21	Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump.
C2	Indicates pumping problems. Washing machine does not drain, the drum does not turn, the appliance makes an unusual noise because of the blockage of the drain pump.

If you are continuing to have issues with your washing machine, then please be sure to contact Glotech Repairs to organise an appointment with our qualified engineers. Some repairs need to be carried out by a trained professional, so if you are about to attempt a repair yourself, please be extremely careful and only do so if you are qualified.

Comments

Casey Hewer

Monday, January 6, 2025 at 12:13 pm

Thank you for your message. If your Beko washing machine is displaying an “Err” code, this generally indicates a fault or malfunction within the machine, though it can be related to several different components. The issue could be related to a problem with the door lock, water supply, drain pump, or even the control board.

Given that the machine is almost new and has only been used four times, it’s likely still under warranty. If simple checks like ensuring the door is fully closed or the water supply is on don’t resolve the issue, it’s best to contact Beko customer service or book an engineer to inspect and resolve the fault. Let me know if you’d like help arranging this!

Casey Hewer

Wednesday, April 29, 2026 at 4:00 pm

Hi there, thanks for getting in touch.

From what you’ve described, the error code along with the door locking and the machine not progressing through the programme suggests there may be an internal fault preventing the cycle from starting properly. This could be related to components such as the door lock mechanism, control board, or another internal system.

There are a couple of basic checks you can try first:

* Turn the machine off at the mains for a few minutes, then switch it back on to see if the error clears
* Make sure the door is closing firmly with no obstructions

If the issue continues and the error code remains, it’s likely that the appliance will need to be inspected in person. At this stage, we would recommend arranging an engineer visit so the fault can be properly diagnosed and resolved.

Let us know if you’d like us to book that in for you, and we’ll be happy to help.

Kind regards,
Glotech repairs

Leave a Reply

Click here to cancel reply.